Depth of field: Canon EOS C500 Mark II

The Canon EOS C500 Mark II uses a Full-Frame 5.9K sensor at 38.1 × 20.1 mm — which fixes the circle of confusion at 0.038 mm, and from that every depth-of-field number on this page. Example: 50 mm at T2.8 focused at 2 m gives 0.33 m of usable depth (1.85 m to 2.18 m). The calculator above is preset to the Canon EOS C500 Mark II.

Depth of Field Calculator

Near limit
Far limit
Total depth
Hyperfocal
FoV / frame width

Circle of confusion per camera derives from sensor width (d/1000 convention). Camera list: nominal manufacturer specs.

Hyperfocal distance on the Canon EOS C500 Mark II

The table is exact for this sensor: the same focal length and stop give different numbers on a camera with a different sensor size — depth of field is a sensor property, not a lens property.

Hyperfocal distance in metres — Canon EOS C500 Mark II, CoC 0.038 mm
Focal lengthT1.4T2T2.8T4T5.6
18 mm6.14.33.12.11.5
25 mm11.88.25.94.13.0
35 mm23.116.211.58.15.8
50 mm47.032.923.516.511.8
85 mm135.995.268.047.634.0

Depth of field at interview distance (2 m)

The interview question in numbers: how much room does the subject have in front of the Canon EOS C500 Mark II before drifting out of focus?

Usable depth at 2 m focus distance — Canon EOS C500 Mark II
Focal lengthT1.4T2T2.8T4T5.6
35 mm0.34 m0.49 m0.70 m1.04 m1.55 m
50 mm0.17 m0.24 m0.33 m0.48 m0.68 m
85 mm0.06 m0.08 m0.11 m0.16 m0.23 m

Working with it on set

Recording at 5952 × 3140, large-screen 4K delivery judges focus more harshly than the table: for critical work, halve the circle of confusion mentally — the 0.33 m at 50 mm/T2.8/2 m becomes half that. The table follows the classical cinema convention.

In pre-production the number belongs in the shot list: a shot planned at T1.4 on 85 mm needs a focus puller and time — both of which belong in the schedule before they are missing on set.

Frequently asked

What circle of confusion does the Canon EOS C500 Mark II use?

0.038 mm — following the usual sensor-width ÷ 1000 convention (38.1 mm ÷ 1000, rounded). Every table on this page uses it.

Do the numbers hold for any lens?

Yes — depth of field depends on focal length, stop, distance and sensor, not the lens model. What differs between lenses is bokeh (how the blur looks), not where it starts.