ProRes 422 LT storage requirements

One hour of ProRes 422 LT in UHD at 25p takes 155 GB. The table below runs the numbers for every common resolution and frame rate — including how many cards and how much backup volume a shoot day actually needs.

Footage Storage Calculator

Source (camera/codec)fpsHoursGB
Footage per day
With all copies
Cards needed
Offload time (1 copy)

Data rates: ProRes/DNxHR are per-frame constants from the Apple/Avid specs; RAW derives from resolution × bytes/pixel (nominal). Details further down this page.

ProRes 422 LT: GB per hour

ProRes 422 LT is per-frame constant (1.77 MB per UHD frame per the spec) — the data rate scales linearly with frame rate and pixel count. That is why 50p is exactly twice 25p, and 8K four times UHD.

ProRes 422 LT storage in GB per hour (2026)
Resolution24p25p30p50p60p
HD 1920×10803739477893
UHD 3840×2160149155186311373
4K DCI 4096×2160159166199331398
6K 6144×3240358373448746895
8K 8192×43206366637961,3261,591

From GB to a shoot day

A typical shoot day produces 2–4 hours of footage per camera. At ProRes 422 LT in UHD 25p that is 311–622 GB per camera — before copies. With 3-2-1 backup (three copies) it multiplies to 1.4 TB per three hours of material. The table runs three full shoot-day scenarios:

Shoot-day scenarios with ProRes 422 LT (UHD 25p, one camera)
FootageRaw data1 TB cards3-2-1 volumeOffload per copy (400 MB/s)
2 h311 GB10.91 TB13 min
4 h622 GB11.82 TB27 min
8 h1.21 TB23.64 TB53 min

Planning offload and backup

Cards are the second calculation: the calculator on the main page derives card count from daily volume and card size — including the spare that stays locked while offloading.

In the schedule this number belongs in two places: as a card budget on the equipment list and as an offload window in the day plan. TillyGen keeps both in the same plan — change the shooting hours and the offload window moves with them.

Frequently asked

How much storage does 1 hour of ProRes 422 LT need?

In UHD at 25p: 155 GB. At 50p, double that. Every resolution is in the table above.

Are the numbers exact?

ProRes/DNxHR are specified target rates; real files land within a few percent. For capacity planning, use the nominal value plus 10 % headroom.