ProRes 422 storage requirements

One hour of ProRes 422 in UHD at 25p takes 216 GB. The table below runs the numbers for every common resolution and frame rate — including how many cards and how much backup volume a shoot day actually needs.

Footage Storage Calculator

Source (camera/codec)fpsHoursGB
Footage per day
With all copies
Cards needed
Offload time (1 copy)

Data rates: ProRes/DNxHR are per-frame constants from the Apple/Avid specs; RAW derives from resolution × bytes/pixel (nominal). Details further down this page.

ProRes 422: GB per hour

ProRes 422 is per-frame constant (2.46 MB per UHD frame per the spec) — the data rate scales linearly with frame rate and pixel count. That is why 50p is exactly twice 25p, and 8K four times UHD.

ProRes 422 storage in GB per hour (2026)
Resolution24p25p30p50p60p
HD 1920×1080525465108130
UHD 3840×2160207216259432518
4K DCI 4096×2160221230276461553
6K 6144×32404975186221,0361,243
8K 8192×43208849211,1051,8422,210

From GB to a shoot day

A typical shoot day produces 2–4 hours of footage per camera. At ProRes 422 in UHD 25p that is 432–863 GB per camera — before copies. With 3-2-1 backup (three copies) it multiplies to 1.9 TB per three hours of material. The table runs three full shoot-day scenarios:

Shoot-day scenarios with ProRes 422 (UHD 25p, one camera)
FootageRaw data1 TB cards3-2-1 volumeOffload per copy (400 MB/s)
2 h432 GB11.26 TB18 min
4 h863 GB12.53 TB37 min
8 h1.69 TB25.06 TB1 h 14 min

Planning offload and backup

Cards are the second calculation: the calculator on the main page derives card count from daily volume and card size — including the spare that stays locked while offloading.

In the schedule this number belongs in two places: as a card budget on the equipment list and as an offload window in the day plan. TillyGen keeps both in the same plan — change the shooting hours and the offload window moves with them.

Frequently asked

How much storage does 1 hour of ProRes 422 need?

In UHD at 25p: 216 GB. At 50p, double that. Every resolution is in the table above.

Are the numbers exact?

ProRes/DNxHR are specified target rates; real files land within a few percent. For capacity planning, use the nominal value plus 10 % headroom.