Depth of field: Blackmagic Pocket Cinema 6K Pro

The Blackmagic Pocket Cinema 6K Pro uses a Super 35 6K sensor at 23.1 × 12.99 mm — which fixes the circle of confusion at 0.023 mm, and from that every depth-of-field number on this page. Example: 50 mm at T2.8 focused at 2 m gives 0.20 m of usable depth (1.90 m to 2.11 m). The calculator above is preset to the Blackmagic Pocket Cinema 6K Pro.

Depth of Field Calculator

Near limit
Far limit
Total depth
Hyperfocal
FoV / frame width

Circle of confusion per camera derives from sensor width (d/1000 convention). Camera list: nominal manufacturer specs.

Hyperfocal distance on the Blackmagic Pocket Cinema 6K Pro

Focused at the hyperfocal distance, sharpness runs from half that distance to infinity — the one number that matters for landscapes, establishers and any shot without a focus puller.

Hyperfocal distance in metres — Blackmagic Pocket Cinema 6K Pro, CoC 0.023 mm
Focal lengthT1.4T2T2.8T4T5.6
18 mm10.17.15.03.52.5
25 mm19.413.69.76.84.9
35 mm38.126.719.113.49.5
50 mm77.754.438.927.219.5
85 mm224.5157.2112.378.656.2

Depth of field at interview distance (2 m)

The interview question in numbers: how much room does the subject have in front of the Blackmagic Pocket Cinema 6K Pro before drifting out of focus?

Usable depth at 2 m focus distance — Blackmagic Pocket Cinema 6K Pro
Focal lengthT1.4T2T2.8T4T5.6
35 mm0.21 m0.30 m0.42 m0.60 m0.86 m
50 mm0.10 m0.14 m0.20 m0.29 m0.41 m
85 mm0.03 m0.05 m0.07 m0.10 m0.14 m

Working with it on set

Recording at 6144 × 3456, large-screen 4K delivery judges focus more harshly than the table: for critical work, halve the circle of confusion mentally — the 0.20 m at 50 mm/T2.8/2 m becomes half that. The table follows the classical cinema convention.

In pre-production the number belongs in the shot list: a shot planned at T1.4 on 85 mm needs a focus puller and time — both of which belong in the schedule before they are missing on set.

Frequently asked

What circle of confusion does the Blackmagic Pocket Cinema 6K Pro use?

0.023 mm — following the usual sensor-width ÷ 1000 convention (23.1 mm ÷ 1000, rounded). Every table on this page uses it.

Do the numbers hold for any lens?

Yes — depth of field depends on focal length, stop, distance and sensor, not the lens model. What differs between lenses is bokeh (how the blur looks), not where it starts.