XF-AVC Intra storage requirements

One hour of XF-AVC Intra in UHD at 25p takes 180 GB. The table below runs the numbers for every common resolution and frame rate — including how many cards and how much backup volume a shoot day actually needs.

Footage Storage Calculator

Source (camera/codec)fpsHoursGB
Footage per day
With all copies
Cards needed
Offload time (1 copy)

Data rates: ProRes/DNxHR are per-frame constants from the Apple/Avid specs; RAW derives from resolution × bytes/pixel (nominal). Details further down this page.

XF-AVC Intra: GB per hour

XF-AVC Intra is per-frame constant (2.05 MB per UHD frame per the spec) — the data rate scales linearly with frame rate and pixel count. That is why 50p is exactly twice 25p, and 8K four times UHD.

XF-AVC Intra storage in GB per hour (2026)
Resolution24p25p30p50p60p
HD 1920×108043455490108
UHD 3840×2160173180216360432
4K DCI 4096×2160185192231384461
6K 6144×32404154325198651,038
8K 8192×43207387699221,5381,845

From GB to a shoot day

A typical shoot day produces 2–4 hours of footage per camera. At XF-AVC Intra in UHD 25p that is 360–721 GB per camera — before copies. With 3-2-1 backup (three copies) it multiplies to 1.6 TB per three hours of material. The table runs three full shoot-day scenarios:

Shoot-day scenarios with XF-AVC Intra (UHD 25p, one camera)
FootageRaw data1 TB cards3-2-1 volumeOffload per copy (400 MB/s)
2 h360 GB11.06 TB15 min
4 h721 GB12.11 TB31 min
8 h1.41 TB24.22 TB1 h 1 min

Planning offload and backup

Cards are the second calculation: the calculator on the main page derives card count from daily volume and card size — including the spare that stays locked while offloading.

In the schedule this number belongs in two places: as a card budget on the equipment list and as an offload window in the day plan. TillyGen keeps both in the same plan — change the shooting hours and the offload window moves with them.

Frequently asked

How much storage does 1 hour of XF-AVC Intra need?

In UHD at 25p: 180 GB. At 50p, double that. Every resolution is in the table above.

Are the numbers exact?

ProRes/DNxHR are specified target rates; real files land within a few percent. For capacity planning, use the nominal value plus 10 % headroom.